Oki 3037 - Manual (Page 64)

ES 3037/3037e Setting up • 64
PCL emulation
The default settings are bold.
Item Value Description
FONT SOURCE
Resident; DIMM0;
Downloaded Selects location of the PCL font
used.
DIMM0 is displayed only when
font DIMM ROM exists in the slot.
Downloaded only appears if fonts
have been downloaded to the
printer.
FONT NO. I000, C001, S001 Sets the PCL font number.
I = internal (resident font); I000 =
Courier.
C = Font stored in the printer’s
Flash memory.
S = downloaded soft font, stored
on the printer’s internal hard disk
drive. Applies only to printers with
a hard disk drive installed.
FONT PITCH 0.44 cpi to 99.99 cpi in 0.01
cpi increments
Default = 10.00 cpi Sets the font width in characters
per inch. Only displayed if the font
is a fixed spacing outline font.
FONT HEIGHT 4.00 to 999.75 point, in 0.25
point increments
Default = 12.00 point Sets the font point size. Applies
only to fixed fonts (does not apply
to proportional fonts).