Oki 3037 - Manual (Page 458)

ES 3037/3037e Accessories • 458
3. Load paper in each tray, using the same procedure you use for
loading paper in Tray 1.
zmsetup loading paper two.eps and zmsetup loading paper four.eps
4. Fold the tray media size identifier sheet to expose the
appropriate media size, then insert it in the holder at the right
end of the tray.
c9_116.jpg
5. Place the appropriate self-adhesive tray number identifier label
(2 or 3) supplied with the optional tray on the lower rectangle at
the right side of the tray.
c9_066.jpg
6. Connect the printer interface cable and power cable, then
switch on the printer.