Oki 3037 - Manual (Page 442)

ES 3037/3037e Windows Troubleshooting • 442
An asterisk (*) symbol appears on the display, repeatedly
moving across the first line then the second.
It takes a long time to start printing.
Possible cause Remedy
The main board is not
properly seated in the
printer. Turn the printer off, then reseat the main board and turn
the printer back on again.
zmother board remove.eps
Possible cause Remedy
The printer has to warm up returning
from power save mode. In the printer menu settings, set power save to
a higher value to increase the length of time
before entering power save mode.
The image drum carries out a
cleaning process to ensure print
quality, which takes time. Wait until this process has been completed.
The fuser unit adjusts temperature,
which takes time. Wait until this process has been completed.
The printer is processing data from
another interface. Wait until this data is processed.