Problems printing from windows, Cannot configure for parallel connection – Oki 3037 User Manual
Page 435
ES 3037/3037e Windows Troubleshooting • 435
PROBLEMS PRINTING FROM WINDOWS
Cannot configure for parallel connection.
Possible cause
Remedy
The computer does not
support bi-directional
parallel interface.
There is no fix for this problem. You should only use a
computer that does support a bi-directional parallel
interface.
Parallel cable does not
meet specifications.
Use a bi-directional parallel cable to IEEE 1284–1994
standard.
The interface is disabled.
Check that the parallel interface is set to enable.
Configuration procedure
was not correctly followed
or cancelled.
Configure again from the beginning.
Parallel cable is
disconnected or faulty.
Reconnect or try another cable.
A converter, buffer or
extension cable is being
used.
Test by connecting printer and computer directly.
- C6050 (40 pages)
- B 6200 (32 pages)
- C5540MFP (1 page)
- C3530MFP (138 pages)
- B4545 MFP (154 pages)
- B4600 Series (104 pages)
- C5250 (83 pages)
- C 7300 (12 pages)
- C 5200n (82 pages)
- 5650 (2 pages)
- B6000 (6 pages)
- PRINTING SOLUTION B2400 (36 pages)
- B6000 Series (8 pages)
- B4000 (2 pages)
- 520 (68 pages)
- C5000 (6 pages)
- 80 Series (97 pages)
- Pos 407II (65 pages)
- OFFICE 87 (40 pages)
- C5900n (6 pages)
- LAN 510W (44 pages)
- 490 (94 pages)
- B 410d (84 pages)
- 42625502 (1 page)
- 84 (99 pages)
- 3391 (35 pages)
- C 130n (172 pages)
- C8800 (87 pages)
- C8800 (179 pages)
- B8300 (95 pages)
- 390 (135 pages)
- 390 (131 pages)
- ES3640E (220 pages)
- ES3640E (24 pages)
- 1220n (207 pages)
- C5200 (2 pages)
- OFFICE 86 (4 pages)
- CX 1145 MFP (177 pages)
- 8c Plus (24 pages)
- 2024/2024e (260 pages)
- FAX 740 (80 pages)
- PRINTER MPS420B (74 pages)
- C 7200 (2 pages)
- B4000 Series (2 pages)
- 2500 (80 pages)