Oki CX 1145 MFP - Manual (Page 155)

154 7.REGISTERING AND SETTING ITEMS
7
4. 2nd Line Board (optional) Installation
Installing the 2nd line board (option) allows simultaneous dual communications of transmission/reception
like transmission during reception and reception during transmission. When the 2nd line is used, the fol-
lowing function setting and registration are required.
•
Registering terminal ID ( P.146 “2.Registering the Terminal ID”)
• Dial type setting
• Line-2 setting
* The 1st line takes precedence in the initial setting (not including the case in which LINE 2 is selected
on the LINE SELECT when you register remote Fax numbers into the address [Operator’s Manual for
Basic Function]). If you want the 2nd line to have priority in the initial setting, ask your service techni-
cian.
The reception mode of line 2 is "Auto reception".
Dial type setting
1 Press the [USER FUNCTIONS] button on the control panel.
2 Press the [ADMIN] button and then the [PASSWORD] button.
3 Enter the administrator password (6 to 10 digits), and then press the
[ENTER] button.
• Ask your administrator for the administrator password.