Other basic parameters, Paper-size setting – Oki 5700 User Manual
Page 45
![background image](/manuals/205910/45/background.png)
English
Installation
3-17
Continuous Tone:
When this function is set to ON, it is possible to choose
for a continuous tone at the end of receiving a fax. Pressing the STOP key
turns off the tone. Speed access no. 63.
PC/FAX Switch:
This function determines whether or not the machine
will automatically switch to FAX when fax reception by a connected
personal computer is not possible (for example, if the PC is turned off or
your fax application is not running). When set to ON, the machine will
automatically switch to FAX. Fax reception is disabled when set to OFF.
Available settings are ON and OFF. Speed access no. 64.
Other Basic Parameters
Monitor Volume:
The machine is equipped with a speaker for monitoring
operations. This function provides a 5-level audio adjustment of the
speaker (OFF, Low, Mid, High-Mid, High). Speed access no. 11.
Buzzer Volume:
The machine is equipped with a buzzer that sounds when
a fax communication ends or, if an external telephone is connected, when
the receiver is not properly returned to its cradle after use. The settings are
Low, Middle and High. Speed access no. 12.
User Language:
Two language variations were installed in the machine at
the factory. The language programmed will be used for showing captions
on the display and for printing reports. Speed access no. 13.
Note:
Your supplier may be able to provide additional languages for
installation.
Paper-Size Setting
The machine is capable of supporting two different paper settings (when
the 2nd-Tray option is installed).
1’ST Paper Size:
Use this function to set the size of the paper primarily
used in the machine. Speed access no. 24.
2’ND Paper Size:
Use this function to set a secondary paper size. Setting
cannot be made unless 2nd-Tray option is installed. Speed access no. 25.