En-77, Intellivolume, A/v sync – Onkyo AV Receiver TX-NR5010 User Manual
Page 77: Name edit
Advanced Operations
En-77
IntelliVolume
■
IntelliVolume
`
–12dB to 0dB to +12dB in 1 dB steps.
With IntelliVolume, you can set the input level for each
input selector individually. This is useful if one of your
source components is louder or quieter than the others.
Use
/
to set the level.
If a component is noticeably louder than the others, use
to reduce its input level. If it’s noticeably quieter, use
to
increase its input level.
Note
• IntelliVolume does not work for Zone 2/3.
A/V Sync
■
A/V Sync
`
0msec to 800msec in 5 msec steps
When using progressive scanning on your Blu-ray
Disc/DVD player, you may find that the picture and sound
are out of sync. With this setting, you can correct this by
delaying the audio signals.
Press ENTER to view the TV picture while setting the
delay when the video source is output to HDMI OUT
MAIN.
To return to the previous screen, press RETURN.
The range of values you can adjust will depend on whether
your TV or display supports HDMI Lip Sync and if the
“Lip Sync” setting is set to “On” or not (
).
Note
• A/V Sync is disabled when the Pure Audio or Direct listening
mode is used with an analog input source.
• This setting cannot be used with the NET input selector.
• The USB input selector can be used only when iPod/iPhone is
connected and Standard Mode or Extended Mode (Video) is
selected.
Name Edit
You can enter a custom name for each individual input
selector and radio preset for easy identification. When
entered, the custom name will appear on the display.
The custom name is edited using the keyboard screen.
■
Name
About Audyssey Dynamic EQ
®
Audyssey Dynamic EQ solves the problem of
deteriorating sound quality as volume is decreased by
taking into account human perception and room
acoustics. Dynamic EQ selects the correct frequency
response and surround levels moment-by-moment at any
user-selected volume setting. The result is bass response,
tonal balance and surround impression that remain
constant despite changes in volume. Dynamic EQ
combines information from incoming source levels with
actual output sound levels in the room, a prerequisite for
delivering a loudness correction solution.
About Audyssey Dynamic Volume
®
Audyssey Dynamic Volume solves the problem of large
variations in volume level between television programs,
commercials, and between the soft and loud passages of
movies. Dynamic Volume looks at the preferred volume
setting by the user and then monitors how the volume of
program material is being perceived by listeners in real
time to decide whether an adjustment is needed.
Whenever necessary, Dynamic Volume makes the
necessary rapid or gradual adjustments to maintain the
desired playback volume level while optimizing the
dynamic range. Audyssey Dynamic EQ is integrated into
Dynamic Volume so that as the playback volume is
adjusted automatically, the perceived bass response,
tonal balance, surround impression and dialog clarity
remain the same whether watching movies, flipping
between television channels or changing from stereo to
surround sound content.
1
Use / /
/
to select a character, and then
press
ENTER.
Repeat this step to enter up to 10 characters.
2
To store a name when you’re done, be sure to
select “OK” by using / /
/
, and then press
ENTER.
BD/DVD
Shift
All Erase
Shift
All Erase
4-4. Name Edit
Name
+10 CLR
+10 CLR
a b c d e f g h i j k l m
n o p q r s t u v w x y z
1 2 3 4 5 6 7 8 9 0 – ^ \
Space
Back Space
Shift OK
, . / ; : @ [ ]
Space
Back Space
Shift OK
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
+
?
` { }
< >
! ˝ # $ % & ’
)
( _
= |
˜
Name input area