About av connections, En-20 – Onkyo AV Receiver TX-NR5010 User Manual
Page 20
Connections
En-20
Connecting AV components
a
*1
If your TV doesn’t support Audio Return Channel (ARC), you
need to connect an optical digital cable together with the
HDMI cable to the AV receiver.
• Before making any AV connections, read the manuals
supplied with your AV components.
• Don’t connect the power cord until you’ve completed and
double-checked all AV connections.
• Push plugs in all the way to make
good connections (loose connections
can cause noise or malfunctions).
• To prevent interference, keep audio
and video cables away from power
cords and speaker cables.
AV Cables and Jacks
■
HDMI
HDMI connections can carry digital video and audio.
■
Component video
Component video separates the luminance (Y) and color
difference signals (P
B
, P
R
), providing the best picture
quality (some TV manufacturers label their component
video sockets slightly differently).
■
Analog RGB
This is a conventional analog interface to connect a PC and
a display device (also called D-Sub or D-subminiature).
■
Composite video
Composite video is commonly used on TVs, DVDs, and
other video equipment.
About AV Connections
HDMI cable
Other cables
: Video & Audio
: Video
Game console
Blu-ray Disc/
DVD player
TV, projector, etc.
AV receiver
TV, projector, etc.
AV receiver
Game console
Blu-ray Disc/
DVD player
: Audio
Green
Blue
Red
Yellow
Right!
Wrong!
Y
P
B
P
R
■
Optical digital audio
Optical digital connections allow you to enjoy digital
sound such as PCM
, Dolby Digital or DTS. The audio
quality is the same as coaxial.
■
Coaxial digital audio
Coaxial digital connections allow you to enjoy digital
sound such as PCM
, Dolby Digital or DTS. The audio
quality is the same as optical.
■
Analog audio (RCA)
Analog audio connections (RCA) carry analog audio.
*2
For PCM signals, the supported sampling rates are
32/44.1/48/88.2/96 kHz. With HDMI connections, 176.4 and
192 kHz are also supported.
Note
• The AV receiver does not support SCART plugs.
• The AV receiver’s optical digital jacks have shutter-type covers
that open when an optical plug is inserted and close when it’s
removed. Push plugs in all the way.
Caution
• To prevent shutter damage, hold the optical plug straight
when inserting and removing.
Orange
White
Red