Onkyo AV Receiver TX-NR5010 User Manual
Page 38
Turning On & Basic Operations
En-38
■
Selecting Presets
■
Deleting Presets
Listening to HD Radio™ Stations (North
American models)
HD Radio technology brings digital radio to conventional
analog AM and FM radio stations, with improved sound
quality, better reception, and new data services. HD Radio
technology provides CD-quality sound for FM stations,
and FM-quality sound for AM stations. In addition,
FM HD Radio stations can transmit multiple programs on
the same frequency by using multicast channels. Text data
display includes station name, song title, artist name, and
so on.
For more information about HD Radio technology, visit:
■
About HD Radio Stations
HD Radio stations broadcast on the same AM and FM
frequencies they’ve always used, and you can receive them
by tuning into your favorite station as normal. If the current
AM or FM station supports HD Radio technology, the
HD Radio indicator lights up. When an HD Radio
transmission is received, the HD SPS indicator appears or
“HD Radio” appears on the display.
• If the current AM or FM station supports HD Radio
technology, the station’s name will be displayed instead
of the band and frequency.
• When music data is received, song title and artist name
information will be displayed next to the “HD” indicator.
• If the current HD Radio station supports multicast
channels, the currently selected multicast channel will be
displayed to the right of the “HD” indicator.
■
Selecting Multicast Channels
FM HD Radio stations can transmit multiple programs on
the same frequency by using what are called multicast
channes.
l
4
Press
MEMORY again to store the station or
channel.
The station or channel is stored and the preset number
stops flashing.
Repeat this procedure for all of your favorite AM/FM
radio stations.
1
To select a preset, use
PRESET
/
on the AV
receiver, or the remote controller’s
CH +/–.
Tip
• You can also use the remote controller’s number buttons to
select a preset directly.
1
Select the preset that you want to delete.
See the previous section.
2
While holding down
MEMORY, press TUNING
MODE.
The preset is deleted and its number disappears from
the AV receiver’s display.
1
Press
TUNER on the remote controller repeatedly
to select “FM” and use the
/
buttons to select
multicast channel.
If you select a multicast channel that is not currently
broadcasting, a plus “+” symbol or period “.” will
appear next to the “HD” indicator, indicating that the
channel has been reserved. When broadcasting
commences, that channel will be selected
automatically.
Note
• Multicast channels are not available on AM.
Reserved channel indication
HD Radio channel number