Troubleshooting, Ameleon, Evice – One for All Kameleon URC-9964B00 User Manual

Page 54: Emote, With

AMELEON

8-D

EVICE

EMOTE

WITH

Troubleshooting

TROUBLESHOOTING

PROBLEM:

No display at all times.

SOLUTION:

Replace batteries with four new AA alkaline batteries.

PROBLEM:

The bottom two IR indicator segments are flashing.

SOLUTION:

Replace batteries with four new AA alkaline batteries.

PROBLEM:

No display when programming.

SOLUTION:

Display has turned off due to inactivity. Start programming
again and do not pause while performing instructions.

PROBLEM:

During programming, the two bottom IR segments display
a long flash.

SOLUTION:

An invalid entry has occurred. Check the keys to be pressed
and start program again.

PROBLEM:

How do I stop programming?

SOLUTION:

Press HOME once to return to the Program Keys screen.
Press HOME once more to exit completely.

PROBLEM:

The unit does not control home entertainment devices or
commands are not working properly.

SOLUTION:

Try all listed codes for the device brands being set up.Make
sure they can be operated with an infrared remote control.

PROBLEM: Tried

Searching For Your Code method and still could not

find a working code.

SOLUTION:

Perform Restoring Factory Default Settings on page 40. Then
repeat Searching For Your Code on page 19.

PROBLEM:

Cannot program a macro onto M1 – M4 or POWER keys.

SOLUTION:

Make sure the total number of key presses being
programmed is less than 15.

PROBLEM:

Power macro does not execute.

SOLUTION:

First, press the Home Theater key once, then press POWER
once.

OFA Kameleon wRF UG rev 3.fm Page 54 Monday, September 13, 2004 11:18 AM