One for All Kameleon URC-9964B00 - Manual (Page 4)

K
AMELEON
8-D
EVICE
R
EMOTE WITH
RF
4 Installing Batteries
INSTALLING BATTERIES
1. On the remote control’s back, push the tab and lift off the battery cover.
2. Obtain four (4) new AAA alkaline batteries. Match the + and – marks
on the batteries to the + and – marks in the battery case, then insert the
new batteries.
3. Press the battery cover back into place. The tab should click when the
cover is locked.
4. Once the batteries are inserted correctly, press anywhere in the middle part
of the screen. The display will turn on and show all keys. If a key is not
pressed after the display turns on, the display will turn off. The display can
be turned on by moving the unit or by pressing on the center of the screen.
❶
❸
❷
NOTE: The two bottom segments of
the IR indicator flash when the
batteries are running low. The
batteries need replacement if one of
the following conditions occurs:
1. Pressing any key turns on all
keys and icons.
2. The vibration switch no longer
activates the display (if the
vibration switch feature is still
enabled).
3. Pressing a key while the screen
is off causes all of the keys and
icons to turn on.
See “Battery Use And Safety” on
page 66 for additional information.
OFA Kameleon wRF UG rev 3.fm Page 4 Monday, September 13, 2004 11:18 AM