Omron Programmable Terminals NT631C - Manual (Page 161)

144
Operations in the System Installer Mode Section 6-5
After initialization, the memory switch statuses are as follows.
* The communications conditions for a bar code reader are initialized as fol-
lows:
Data bits: 7 bits; stop bit: 1 bit; parity: none; flow control: RS/CS.
6-5 Operations in the System Installer Mode
The following functions can be executed in the System Installer mode:
• Setting the display language (see below)
• Clearing/installing the system program (page 145)
• Disabling/enabling display of the System Menu (changing the system set-
tings) (page 147)
• Disabling/enabling writing to the screen data memory (changing the sys-
tem settings) (page 147)
• Clearing screen data (page 148)
For details on calling the System Installer mode, refer to Calling the System
Installer Mode (page 134).
The version code displayed beside the System Installer title on the screen
indicates the version of the System Installer Mode. For details, refer to 3-5
Using a Memory Unit.
6-5-1 Setting the Display Language in the System Installer Mode
The first setting made in the System Installer mode is to select whether the
display language is to be English or Japanese.
Memory Switch Status
Start-up Wait Time 00
Key Press Sound ON
Buzzer Sound OFF
Printer Controller ESC/P
Print Method Tone (NT631C only)
Screen Saver Movement Display erased
Screen Saver Start up Time 010
Hist. Disp. Method From New Data
Resume Function OFF
Comm. Auto-return OFF
Time-out Interval 01
Retry Counts 005
Comm. A Method
Host Link (communications speed = 9600 bps)
*
Comm. B Select RS-232C
Comm. B Method None