Oceanic Watch / Dive Computer GEO - Manual (Page 78)

78
WET ACTIVATION CONTACTS
The Wet Contact Dive Mode Activation feature is active any
time WET ACTIVATION is set ON.
The GEO is configured with contacts that will automatically
activate Dive Mode when the space between the contacts is
bridged by a conductive material (immersed in water) and it
senses a Depth of 5 FT (1.5 M) for 5 seconds.
The contacts are the pins of the PC Interface Data Port and the
stems of the Push Buttons.
As long as the contacts are bridged on the Surface, the
graphic WET will alternate with the Day of Week graphic
(MON - SUN) on the Watch Main and Alternate Time screens
(Fig. 68), and the graphics NORM and SEA (or EL2 to EL13)
on the NORM, GAUG, and FREE Surface Main screens (Fig.
69).
Upon removing the bridge between the contacts (drying the
GEO), the graphic WET will no longer be displayed.
The GEO will continue checking for Depth, until a dive is made
or it reverts to the Watch Time screen after 2 hours.
Fig. 68 - WATCH TIME
Fig. 69 - DIVE
COMPUTER MAIN