Oceanic Watch / Dive Computer GEO - Manual (Page 10)

10
INTRODUCTION
Welcome to OCEANIC and thank you for choosing the GEO !
It is extremely important that you read this Operating Manual in sequence and
understand it completely before attempting to use the GEO as a dive computer.
It is equally important that you read the Oceanic Dive Computer Safety and
Reference Manual (Doc. No. 12-2262) provided with your GEO. It contains
information that you must become familiar with prior to diving with your GEO.
Remember that technology is no substitute for common sense, and a dive computer
only provides the person using it with data, not the knowledge to use it.
INTERACTIVE CONTROL CONSOLE
The Interactive Control Console consists of four Control Buttons that allow you to
select mode options and access specific information. They are also used to link
the Transmitter(s), enter Settings, activate the Backlight, and acknowledge the
Audible Alarm.
Throughout this manual they will be referred to as the M, S, L, and A buttons.
 Upper/Left - Mode (M) button
 Upper/Right - Select (S) button
 Lower/Right - Light (L) button
 Lower/Left - Advance (A) button
M
A
S
L