Oceanic Watch / Dive Computer GEO - Manual (Page 29)

29
> Upon being toggled to ON, the Alarm will be set to sound
every day at the Time indicated.
 Depressing both the A and S buttons simultaneously for 2
seconds will access the SET DAILY ALARM screen allowing
a new Time to be set.
 Depressing and holding the M button for 2 seconds will
revert to the Local Default Watch Time screen.
 Pressing the L button will activate the Backlight.
> If no button is pressed during a period of 2 minutes, the
unit will revert to the Local Default Watch Time screen.
SET DAILY ALARM, information provided includes (Fig. 22):
> Alarm icon
> Graphics ALRM and SEt.
> Alarm Time previously set (hr:min) with the HOUR Set Point
flashing.
 Depressing and holding the S button while the HOUR Set
Point is flashing will scroll through the Set Points in 1 hour
increments at a rate of 4 per second from 12: Am to 11:
Pm (or 0: to 23: if 24 hour format). The graphic A (= Am)
or P (= Pm) will be displayed when setting Time in 12
Hour Format.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the HOUR Set Point and/or advance to
SET MINUTE with the Set Point flashing.
Fig. 22 - SET DAILY
ALARM