Oceanic Watch / Dive Computer GEO - Manual (Page 125)

125
 Lift the Hatch with O-ring up and away from the Housing.
 Using care not to damage the Contact (Fig. 119a), slide
the Battery up and out of the Left side of the Battery
Compartment.
 Discard the Battery according to local regulations
governing disposal of Lithium batteries.
CAUTION: DO NOT allow a metal object to
short circuit the top of the Battery which is
positive (+) to the negative ( - ) contact of the
Battery Compartment.
Inspection
 Closely check all of the sealing surfaces for any signs of
damage that might impair proper sealing.
 Inspect the Buttons, Lens, and Housing to ensure they are
not cracked or damaged.
WARNING: If damage or corrosion is found,
return your GEO to an Authorized Oceanic
Dealer, and DO NOT attempt to use it until it
has received factory prescribed service.
 Remove the Battery Hatch O-ring and inspect it for any
signs of deterioration or deformity. DO NOT use tools to
remove the O-ring.
 To ensure proper sealing, O-ring replacement is highly
recommended each time the Battery is replaced.
a
Fig. 119 - BATTERY
REMOVAL