Oceanic Watch / Dive Computer GEO User Manual

Page 20

SET MAIN TIME

This Mode allows the Date and Time of Day to be set which

will also serve as the basis for ALTERNATE TIME values.

There are 3 Time Set screens - Set Hour Format, Set Time of

Day, and Set Date.

NOTE: MAIN TIME must be selected as the

Local Default Time in order to set the Time and

Date.

Sequence of Time/Date settings:

Hour Format > Hour > Minute > Year > Month > Day

Day of the Week is set automatically when the Date is set.

Depressing and holding the M button at any time for 2

seconds or if no button is pressed during a period of 2

minutes, the unit will revert to the MAIN TIME screen.

While the MAIN TIME screen is being displayed, pressing the

A and S buttons simultaneously for 2 seconds will access the

Set Hour Format screen displaying the graphic HOUR, symbol

TIME, and the Hour Format Set Point 12 or 24 flashing (Fig. 8).

Pressing and releasing the S button momentarily (< 2

seconds) will toggle the setting between 12 and 24.

Fig. 8 - SET HOUR

FORMAT