Omron ZS-MDC - Manual (Page 75)

Sect
ion 4
APPLICATION SETTING EX
AMPLE
S
Section 4
Measuring the Warp of a Workpiece
4-19
ZS-MDC
User’s Manual
• To output the judgment result of the operation
[I/O SET]-[I/O SET]-[OUT]
5.
Select [TASK2] so that the judgment on the
warp can be output.
• To linear-output the operation result
[I/O SET]-[I/O SET]-[ANALOG]
5.
Select [TASK2] so that the warp value can be
linear-output.
The calculation results of each CH can be batch-acquired if you use the communication command.
▲
1 TASK1
3 TASK3
2 TASK2
4 TASK4
▲
1 TASK1
3 TASK3
2 TASK2
4 TASK4