Olympus LS-100 - Manual (Page 99)

EN
6
File M
en
u
File menu [File Menu]
8
Press the OK button.
• The animation is displayed on the
screen, and the bounce process starts.
[When [Done] is displayed, bouncing
is finished.
• When the bounce process completes,
the new PCM format [44.1kHz/16bit]
file is saved in the project.
A
• When [Bounce] (☞ P.106) is set to the Fn
button, pressing the allocated button starts the
bounce process.
Caution
• [Bounce] does not function in the recorder
mode.
5
[Menu] { [File Menu] {
[Bounce]
7
Press the
+ button to select [Start].
6
Press the OK button.
• The bounce check window appears.