Olympus LS-100 - Manual (Page 43)

EN
3
Re
co
rd
in
g
Recording
Voice Sync Recording [V-Sync. Rec]
Voice sync recording is a feature that
automatically starts a recording when the
recorder detects a sound louder than the
voice sync level (detection level) setting;
when the sound level decreases, recording
stops automatically.
1
Set the [Rec Mode] to [ V-Sync.
Rec]. (☞ P.79).
2
Press the REC button to enter the
recording standby mode.
3
Press the 9/0 button to
adjust the voice sync level.
• The voice sync level will be shown in
15 steps on the display.
• The higher the value, the more
sensitive and easily activated the
recorder becomes; at a higher setting,
even a small sound will activate
recording.
4
Press the REC button again to
start recording.
• The recorder will enter the recording
standby mode. [Standby] will flash
in the display, and the recording
indicator light will flash.
• When the recorder receives an input
at or above the voice sync level, it
automatically starts a recording.
5
Voice sync recording stops
automatically.
• If [Mode] setting of the [V-Sync. Rec]
is set to [Once], the recorder will close
the file after recording, and enter the
recording stop mode. (☞ P.79).
• If [Mode] setting of the [V-Sync. Rec]
is set to [Continuous], the recorder
will close the file after recording, and
enter the recording standby mode.
Upon detecting a sound, it will start
recording in a new file. (☞ P.79).
• To manually stop the voice sync
recording, press the STOP button.
Voice sync level
(moves sideways
according to the set
level)
Voice sync indicator