Olympus LS-100 - Manual (Page 98)

EN
6
File M
en
u
File menu [File Menu]
Bounce [Bounce]
Several tracks that are saved in a multi track
mode project can be grouped into one.
2
Press the OK button.
3
Press the +/-/9/0 button to
select the project for the bounce
process.
4
Press the OK button.
• The screen shifts to the multi track
screen.
1
[Home] { [Multitrack]
7
Press the
+ button to select [Start].
8
Press the OK button.
• The animation is displayed on the
screen, and CD Write starts. [When
[Done] is displayed, CD Write is
finished.
A
• When [CD Write] (☞ P.106) is set to the Fn
button, pressing the allocated button starts the CD
write.
2 Repeat step 1 to select other files,
and press the F2 (Enter) button.
Caution
• To make the writing more reliable, use the AC
power supply to power the external CD drive.
• A few minutes may pass before the process
completes. Avoid conducting the following
operations in order to prevent damage to data.
In addition, check the remaining battery level
beforehand in order to avoid running out of the
battery during the process.
1
Disconnecting the USB cable during the
process.
2 Removing the battery during the process.
3 When the recording medium is [ SD card],
removing the SD card during processing.
4 Turning off the external CD drive during
processing.
5 Removing the CD during processing.