Olympus C-2040ZOOM - Manual (Page 28)

Attaching the strap and lens cap
1
Getting Started
Use the procedure below to attach the strap and lens cap to the camera.
Thread the cord through
the lens cap in the direc-
tion indicated by the arrow
in the figure.
Thread the strap through
the lens cap cord.
Then thread the strap
through strap mount.
Thread the strap through
the loop and fastener as
indicated by the arrows in
the figure. Then check that
the strap does not loosen
or come undone when
pulled.
Repeat steps 3 and 4 to
attach the strap to the
mount on the other side of
the camera.
5
4
3
2
1
28
•
When the camera is hanging by its strap, ensure that it is not weighed down
by other objects. This could result in personal injury or damage to the camera.
•
Take care to attach the strap correctly as described above. If the strap is
attached incorrectly in any way and the camera comes loose or is dropped
as a result, Olympus accepts no liability whatsoever for any injury or dam-
age that may arise.
Strap eyelet
Fastener