Olympus C-2040ZOOM - Manual (Page 144)

144
6
Displaying, editing and erasing your pictures
● If you press the [OK] button
when the camera is not
connected to a TV, the
image is protected. (P.142)
Viewing images on a TV
•
The monitor is automatically switched off when you connect the camera to
a TV.
•
On some TVs, the picture may be displayed off-center.
•
On some TVs, a black frame may be displayed around the picture. This
frame may be very noticeable when the picture is printed on a video print-
er. Check the completed prints.
•
You should use the optional AC adapter as the camera power supply when
you are viewing pictures on a TV.
10 12.23.,00 21:56
SQ
10 12.23.,00 21:56
SQ
OK OK
OK
10 12.23.,00 21:56
SQ
Normal display of a picture shot
with the camera on its side.
[Using the optional remote control]
To use the remote control, ensure that the remote control is pointed at the
remote control receiver on the camera. Use the +/- button to select pictures
and the W button to play back an index. You can also use the T button to
switch to Close-up playback mode and then use +/- button to move the selec-
tion area rightward or leftward.
•
Movie images cannot be rotated.