Olympus C-2040ZOOM - Manual (Page 114)

114
4
Custom Photography
Taking sequential shots (Sequence mode)
•
You cannot use the built-in flash in Sequence mode. (The flash is automat-
ically set to Flash Off mode.)
•
When you are using an external flash, select a speed that is fast enough to
keep pace with sequential shooting.
•
Sequence mode cannot be used with the TIFF quality mode.
•
Even if you switch from Sequence mode to another mode after taking
sequential shots, you cannot take another picture until the camera fin-
ishes recording the sequential shots onto the card.
•
To prevent camera shake, the slowest available shutter speed in Sequence
mode is 1/30 sec. Dimly lit subjects may appear darker than usual.
•
The monitor is switched off in Sequence mode. Use the viewfinder to take
pictures in this mode.
•
Unless you select "OFF" in the "ALL RESET" setting (P.173), this setting will
be cancelled when you switch the camera off.
•
The sequential shooting rate is slower in AF sequential shooting.
Press the [OK] button.
● The setting is saved and you
exit the menu screen.
Take the picture.
● Sequential shooting contin-
ues for as long as you hold
down the shutter button.
● Sequential shooting stops
when you release the shutter
button.
5
4
4
5