Olympus C-2040ZOOM - Manual (Page 203)

203
1 0
Miscellaneous
Troubleshooting
Problem:
Cause Solution See
The date recorded with the image data is wrong.
qThe date was not set.
wThe camera has been left for
approx. 1 week with the batteries
removed and the date setting is
canceled.
qSet the date. The clock adjustment
is not factory-preset.
wTry setting the date again.
P.38
P.38
Problem:
Cause Solution See
The camera does not take a picture when I press the shutter button.
iThere is a write-protect sticker on
the card, or there is no card in the
camera.
oThe Mode dial is set to " ".
iInsert a new card in the camera.
oSet the Mode dial to "P", "A/S/M" or
" ".
P.35
P.41
Problem:
Cause Solution See
The flash does not fire.
qThe flash mode is set to "Flash
Off".
wThe subject is brightly lit.
e " ", " " or "BKT" is selected
as the drive mode.
rThe camera is set to Panorama
mode.
t"WHITE BOARD" or "BLACK BOARD"
is selected in the FUNCTION setting.
AF
qChange the flash mode. (The flash
cannot be used in Sequence mode
or Panorama mode.)
wTo force the flash to fire, set the flash
mode to "Forced Flash".
eSwitch to a single-shot mode.
rDeactivate Panorama mode.
tThe flash does not fire when "WHITE
BOARD" or "BLACK BOARD" is
selected.
P.124
P.124,
126
P.93
P.120
P.118