Ricoh Caplio R40 - Manual (Page 179)

177
J. Error Messages
If an error message is displayed on the screen, take the
corresponding action.
Error Message Cause and Action Page
INSERT CARD No card is loaded. Insert a card. P.20
SET DATE. The date is not set. Set the date. P.120
FILE NUMBER OVER LIMIT The file number limit has been exceeded. Use another card. P.118
UNMATCHED FILE The camera cannot display this file. Check the file contents on your
computer, and then delete the file. -
INSUFFICIENT MEMORY.
CONTINUE? Because there is not sufficient capacity on the card, all the
files cannot be copied. Use another card. P.18
PROTECTED You are trying to delete a protected file. P.99
CARD IS WRITE-PROTECTED. The card is “Locked (write-protected)”. Unlock the card. P.18
PRINT SETTINGS CANNOT BE
SET FOR THIS FILE. This file (movie or other file) cannot be selected for printing. -
INSUFFICIENT MEMORY Files cannot be stored. Make sure there is enough free
space or delete unwanted files. P.49
P.110
P.111
The image print number limit has been exceeded. Select an
image and set the number to 0. -
FORMAT INTERNAL MEMORY You must format the internal memory. P.111
FORMAT CARD The card is not formatted. Format the card. P.110
CARD ERROR Reformat the card. If, after doing so, the error message still
appears, the card may be faulty. Do not use the card. P.110
WRITING TO CARD Writing file to memory. Wait until writing finishes. -
NO FILE There are no files that can be played back. -
CANNOT RECORD The number of remaining shots is 0. Switch to another card
or the internal memory. -