Ricoh Caplio R40 User Manual

Page 115

113

Chan

ng Cam

era

ttings

Assigning a Function to the ADJ. Button

(ADJ BTN. SET.1/2)

Pressing the ADJ. button enables you to display the screens for
setting the exposure and white balance with fewer button
operations.
You can also use [ADJ BTN. SET.1] and [ADJ BTN. SET.2] to add a
camera function that can be activated by pressing the ADJ. button.

To assign a function to either [ADJ BTN. SET.1] or [ADJ BTN. SET.2],
follow the steps below.

Display the SETUP menu.

For the operating procedure, see P.109.

Press the " button to select [ADJ BTN. SET.1] or [ADJ BTN.
SET.2], and then press the $ button.

Press the !" buttons to select
the desired setting.

Press the C/D or # button.

If you pressed the # button in
Step 4, press also the
C

/D button.

This setting is used until it is changed.

Reference

For information on how to use the ADJ. button, see P.57.

Available Settings

Refer to

OFF *Default setting for [ADJ BTN. SET.2]

ISO (ISO SETTING) *Default setting for [ADJ BTN. SET.1]

P.81

QUALITY (PIC QUALITY/SIZE)

P.60

FOCUS

P.64

SHARP (SHARPNESS)

P.68

METERING (PHOTOMETRY)

P.67

AUTO BKT (AUTO BRACKET)

P.70

CONT MDE (CONT. MODE)

P.87

WITH SND (IMAGE WITH SOUND)

P.76