Rimage Everest III User Manual

Page 34

Rimage Everest III printer

110875_A

3. Clean

the

platen roller

a. Apply

isopropyl alcohol

to the sponge

swab

Caution!

Do not apply pressure when

cleaning the platen roller with the
sponge swabs. Applying pressure may
damage the platen roller, leaving
scratch marks on the printed disc.

b. As the platen roller rotates, use the

sponge swab

to wipe the platen

roller

, allowing it to rotate a full turn

before moving to the next area.

4. Press and release the operator button to exit diagnostics mode.

5. Power off the printer.

6. Prepare

the

printer

for use.

a. Install

the

print ribbon carrier

b. Install

the

retransfer ribbon carrier

Retransfer
ribbon
carrier

Platen
roller

c. Close

all

latches.

d. Close

the

side cover

e. Turn

the

mode switch

to the correct operating position. For more information, see

7. Power on the printer. The printer is ready.