Changing the print ribbon – Rimage Everest III User Manual
Page 27
Maintain the Everest printer
110875_A
21
Changing the print ribbon
Before you change the Everest print ribbon, allow time for the new ribbon to become acclimated
to the environment. Allow more time for greater temperature and humidity differences.
-
Important!
Ribbons must be stored at a temperature between 50°– 90°F (10°– 32°C). Avoid
moisture and direct sunlight. Do not reuse ribbons.
1. Power off the printer.
2. Remove
the
print ribbon
.
a. Press
the
two side cover
latches
to release the side
cover.
b. Lower
the
side cover
.
c. Turn
latch 1
counter-
clockwise.
d. Remove
the
print ribbon
carrier
.
e. Remove
the
print ribbon
from the carrier.
Side cover latches
3. Discard the used print ribbon.
#
Tip:
Perform cleaning
procedures while the print
ribbon is removed. For more
information see
Side cover
Print ribbon carrier
Latch 1