Rimage Everest III - Manual (Page 12)

Rimage Everest III printer
6 110875_A
Everest printer switches
There are two switches on the rear
of the Everest printer: the mode
switch and the AC voltage switch. Mode switch
Voltage switch
Mode switch
-
Important! You must power off the Everest printer before changing the mode switch.
The mode switch is a rotary switch used to set the operational mode of the Everest printer. The
printer must be powered off for the mode to be changed. After changing the mode, the printer
must be powered on again to recognize the change. The opening at the base of the cap on the
switch indicates the selected mode. The printer comes set in regular operation mode. Only
diagnostic mode requires changing the mode switch.
Mode switch positions
Switch
Position
Mode Mode Switch
2 Regular operation
3 Diagnostic
5 – 9 Reserved
AC voltage switch
The AC voltage switch is used to select the AC voltage of the power outlet.
n
Warning! Set the AC voltage switch to match the AC voltage of the AC power outlet.