Rimage Everest III User Manual

Page 32

Rimage Everest III printer

110875_A

Clean the tacky rollers with the Everest cleaning kit

1. Power off the printer.

2. Remove

the

print ribbon.

For specific

instructions, see Changing the print
ribbon. Refer to page 21.

3. To access the tacky rollers, remove

the supply roll from the print ribbon
carrier

Note:

The supply roll is the

unused portion of the print ribbon.

4. Clean

the

tacky rollers.

a. Apply

isopropyl alcohol

to the

sponge swab.

b. Use

the

sponge swab

to clean

tacky roller 1

c. Use

the

sponge swab

to remove

any waxy buildup from other parts
of the ribbon carrier.

d. Reinstall

the

supply roll

on the

print ribbon carrier.

e. Inside the printer, use the sponge

swab

to wipe tacky roller 2.

5. Prepare

the

printer

for use.

a. Install

the

print ribbon carrier

b. Close

all

latches

Ribbon
carrier

Tacky
roller 1

c. Close

the

side cover

6. Power on the printer. The printer is

ready.

Ribbon carrier

Tacky
roller 2