Subaru Robin Power Products RG2800I - Manual (Page 54)

– 51 –
(2) Install the ratchet and friction spring.
Install the ratchet and friction spring into the reel.
Friction plate
Retaining-ring C
Ratchet
Friction
spring
(3)Installation of friction plate and retaining ring C.
Install by putting the Tab of friction plate into the
hole of the ratchet.
Fasten with the retaining ring C.
Be sure that the retaining ring is fitted into the
grooves.
Friction plate
Retaining-ring C
Caution:
Please wear protective goggles before starting assembly.
2) Assembly procedure
(1) Assemble the reel into the case.
-1 Apply grease to the case.
-2 Properly orient the inner end of the spring installed
in the reel.
-3 Hold the reel so that the shaft and hook part can
be caught on the inner end of the spring, and
softly drop into the case from the top.
-4 Move the reel gently in the counter-clockwise
direction, making sure that the spring catches.
Inner end of
the spring
Hooking
position
Starter case
Reel
Spiral
spring
Grease