2 access via cli, Access via cli, 2 access via – RCA 605 User Manual
Page 18: Chapter 1
8
E-DOC-CTC-20051017-0151 v1.0
Chapter 1
Getting to know your SpeedTouch™
1.2.2 Access via CLI
To access the
SpeedTouch™ via the
Command Line
Interface (CLI)
You can access the Command Line Interface (CLI) via:
The embedded Expert pages. For more information, see
A Telnet session
This requires a TCP/IP connection between the host from which the Telnet
session is opened and the SpeedTouch™. Your SpeedTouch™ and the
connected computer must have an IP address in the same subnet.
The serial ‘Console’ interface
Quote site commands (over FTP)
For more information, see
“ Quote site command” on page 12
.
For more information on CLI commands, see the SpeedTouch™ CLI Reference
Guide.
This manual is related to the following products: