4 routed pppoi, Availability, Introduction – RCA 605 User Manual
Page 154: Creating a routed pppoi connection entry, Additional configuration, Routing, Routed pppoi, Chapter 5
144
E-DOC-CTC-20051017-0151 v1.0
Chapter 5
Expert Configuration
5.4.4 Routed PPPoI
Availability
The ISDN modem is only fully functional after activating the ISDN software module
with the ISDN software module activation key. For more information, see
.
Introduction
The Routed PPPoI configuration page allows you to add new Routed PPPoI
connection entries or to change settings of existing entries.
Creating a Routed
PPPoI connection entry
To add a Routed PPPoI connection entry:
1
Click New.
2
In the Interface box, type a unique interface name.
3
In the ISP profile list, click:
The name of a profile if you want to use an existing profile.
New to create a new profile. Type the name you want to assign to this
profile in the Enter Name box.
These ISP profile contain the ISDN parameters.
4
Type user name and password for the account at the ISP.
5
If needed, enter the ISDN parameters of your ISP.
6
Click Apply.
Additional configuration
Once created, per Routed PPPoI connection, additional configuration is possible by
clicking:
1
2
Routing
Following fields are available:
Destination:
Controls the networks that can be reached via this particular PPP connection.
Specify the remote host or network in prefix notation. e.g. 172.16.0.0/16.
Label:
Allows you to assign a label to this connection.
These parameters can only be modified when the link is down. Take the link
down first by clicking Hang-up.