Radio Shack ET-1106 - Manual (Page 35)

35 Troubleshooting
Call is noisy. Do not place the base near appli-
ances or large metal objects.
Keep the handset away from interfer-
ence sources such as computers,
remote control toys, wireless micro-
phones, wireless alarm systems, wire-
less intercoms and room monitors,
fluorescent lights, and electrical appli-
ances. If the interference is severe,
turn off the interfering device.
Hang up and redial the number.
Handset sound flutters or
fades. Be sure the battery pack is charged.
Fully extend the handset’s antenna
vertically.
Move the handset closer to the base.
Can make calls, but tele-
phone does not ring. Check with your telephone company
which may be using unusual ringing
methods. Your telephone is designed
for standard straight-line bridged ring-
ing.
Make sure the ring type is not set to
OFF .
Can receive calls, but cannot
make calls. Set dial type ( TONE/PULSE ) for
the type of service you have (see
“Setting the Dialing Mode” on
Page 16.)
Problem Solution
43-1106.fm Page 35 Wednesday, April 26, 2000 10:30 AM