Radio Shack ET-1106 - Manual (Page 17)

17 Operation
3. Press
9 9 9 9
or
8 8 8 8
on the handset until SETUP MODE
appears, then press OK .
4. Press
9 9 9 9
or
8 8 8 8
on the handset until SET KEYCLICK
appears, then press OK .
5. Press
9 9 9 9
or
8 8 8 8
and KEYCLICK ON or KEYCLICK OFF
(silences the tones you hear when you press the keys on
the handset) appears.
6. Press OK to enter your selection, a tone sounds.
7. Press OFF to exit.
ˆ
Operation
MAKING AND RECEIVING CALLS
To make a call, lift the handset from the base, press TALK/
FLASH , and dial the number. The CHARGING/IN USE indicator
on the base lights green and PHONE ON displays on the hand-
set.
Note: The handset can be turned on while still on the base, in-
advertently leaving the phone off-hook. When the phone is not
in use, the CHARGING/IN USE indicator should be red.
Pre-Dialing
You can also use the keypad to pre-dial (enter) the number first,
then press
TALK/FLASH . The phone dials the desired number.
The CHARGING/IN USE indicator on the base lights green.
43-1106.fm Page 17 Wednesday, April 26, 2000 10:30 AM