Radio Shack ET-1106 - Manual (Page 16)

16 Setting Up the Phone
Setting the Dialing Mode
1. Press OFF on the handset.
2. Press OK on the handset to display the categories.
3. Press
9 9 9 9
or
8 8 8 8
on the handset until SETUP MODE
appears, then press OK .
4. Press
9 9 9 9
or
8 8 8 8
on the handset until SET DIAL TYPE
appears, then press OK .
5. Press
9 9 9 9
or
8 8 8 8
to select DIAL TYPE TONE or DIAL
TYPE PULSE .
6. Press OK and a tone sounds.
7. Press OFF to exit.
If you are unsure which type of service you have, once the bat-
tery is charged, set
SET DIAL TYPE to DIAL TYPE TONE ,
then press TALK/FLASH and listen for a dial tone. Press any
number other than 0 and 1. If the dial tone stops, you have
touch-tone service. Leave
TONE/PULSE set to TONE .
If the dial tone continues, you have pulse service. Set SET
DIAL TYPE to DIAL TYPE PULSE .
Setting the Keyclick
1. Press OFF on the handset.
2. Press OK on the handset to display the categories.
43-1106.fm Page 16 Wednesday, April 26, 2000 10:30 AM