Radio Shack ET-1106 - Manual (Page 18)

18 Operation
To end a call, place the handset on the base or press OFF on
the handset.
To answer a call, press any key on the handset.
Notes:
• After you press TALK/FLASH , # cannot be used to insert a
pause. It is effective in pre-dial and memory dialing only.
See “Entering a Pause in a Memory Number” on Page 23.
• You can make or answer a call on another phone on the
same line as the phone. EXTENSION IN USE displays on
the handset when another line is in use.
• To save battery power, the handset display turns off if the
phone is not used within 30 seconds.
• You cannot enter the main menu when the phone is set to
TALK/FLASH .
ADJUSTING THE HANDSET’S VOLUME
To adjust the handset’s volume, press TALK/FLASH then re-
peatedly press
9 9 9 9
or
8 8 8 8
during a call until the sound level is
comfortable. You can set the handset’s volume to one of four
levels. The volume level appears on the display.
USING REDIAL
Your cordless phone stores the last five numbers you dialed —
the most recent is R1. The redial memory holds up to 20 digits,
so it can store long-distance as well as local numbers. You can
use redial memory in on-hook or off-hook status.
43-1106.fm Page 18 Wednesday, April 26, 2000 10:30 AM