Radio Shack ET-1106 - Manual (Page 19)

19 Operation
1. To redial a number, press OFF then press OK . REDIAL
MEMORY appears.
2. Press OK then press
9 9 9 9
or
8 8 8 8
to select the desired stored
number from R1 to R5.
3. Press TALK/FLASH . The phone dials the stored number
and the handset shows the number dialed.
Notes:
• The redial memory only stores the first 20 digits of any
number dialed.
• The dialed numbers are saved only if TALK/FLASH is
pressed.
• We recommend you do not use REDIAL MEMORY when
you have pulse telephone service to dial a number that
includes a tone entry (see “Using Tone Services On a
Pulse Line” on Page 21).
• The REDIAL MEMORY does not store a FLASH (switch-
hook) entry. It saves the digits before you press TALK/
FLASH . After the call is completed, the digits dialed after
FLASH are saved to another redial memory location.
• The digits displayed will be included in memory dialing.
43-1106.fm Page 19 Wednesday, April 26, 2000 10:30 AM