Radio Shack ET-1106 - Manual (Page 24)

24 Operation
Reviewing Numbers Stored in Memory
1. Press OK on the handset then press
9 9 9 9
or
8 8 8 8
until SPEED
DIAL MEMORY appears.
2. Press OK on the handset. SPEED DIAL LOCATION_
_ appears.
3. Enter the memory location number on the keypad (01, 02,
03, and so on) to display the stored number.
Note: You can also locate numbers stored in memory by press-
ing or holding
9 9 9 9
or
8 8 8 8
.
Dialing a Stored Number
1. Lift the handset and press OFF .
2. Press OK then press
9 9 9 9
or
8 8 8 8
until SPEED DIAL MEM-
ORY appears.
3. Press OK then enter the 2-digit memory location number or
hold down
9 9 9 9
or
8 8 8 8
to locate the stored number you wish
to dial. The memory location and number displays.
Note: If you forget the memory location number, press
9 9 9 9
or
8 8 8 8
to search through the 20 memory locations.
4. Press TALK/FLASH . The phone dials the number.
Deleting a Number from Memory
1. Press OFF on the handset.
43-1106.fm Page 24 Wednesday, April 26, 2000 10:30 AM