Roberts Radio iStream - Manual (Page 83)

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri) 82
Display and Audio .
Setting up your My EQ profile
If you find the preset equaliser functions not to your liking, you may set
up a custom treble and bass setting as follows:
1. Follow steps 1-3 on the preceding page in order to enter the Equaliser
menu.
2. Rotate the Tuning/Select control until 'My EQ profile setup' is highlighted
on the display. Press the control to enter the adjustment mode.
3. To adjust the bass level rotate the Tuning/Select control until 'Bass'
is highlighted on the display. Press the control to enter the adjustment
mode and rotate the control until the desired level (between -8 and
+8) is displayed. The sound will change as you turn the control. Press
the control when you are happy with the bass setting.
4. To adjust the treble level rotate the Tuning/Select control until 'Treble'
is highlighted on the display. Press the control to enter the adjustment
mode and rotate the control until the desired level (between -8 and
+8) is displayed. The sound will change as you turn the control. Press
the control when you are happy with the treble setting.
5. Press the Back button and the display will prompt you to save the
changes. If you wish to save the changes rotate the control to highlight
'YES'. If you do not wish to save the changes highlight 'NO'. Press the
Tuning/Select control to enter the selection.
6. To use the 'My EQ' profile rotate the Tuning/Select control until 'My
EQ' is highlighted, and then press the control to make the selection.
To quickly cancel the effect of the 'My EQ' profile rotate the Tuning/Select
control until 'Normal (Flat)' is highlighted on the display and press the
control to select. The treble and bass settings will be remembered for the
next time that you wish to use the 'My EQ' setting.
1-6
5