Ricoh GX200 - Manual (Page 93)

91
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
Note ----------------------------------------------------------------------------------------------
• To increase the exposure time, lower the shutter speed. In this case, camera shake
may occur. Hold the camera steady with two hands or use a tripod when shooting.
• While shooting with a slow shutter speed, the picture display turns off.
• When the ISO setting is set to [Auto] or [Auto-Hi] in manual exposure mode, the ISO
is fixed at ISO 100. (GP.146)
• The AE lock does not work in manual exposure mode even if the Fn1/Fn2 button is
assigned to [AE Lock]. When the Fn1/Fn2 button is pressed, the value is automatically
set closer to the appropriate exposure (closer to the center of the exposure value
indicator). This is useful when, for example, you want to change/adjust the exposure
value from closer to the center of the exposure value indicator (the appropriate
exposure).
Caution------------------------------------------------------------------------------------------
• When the shutter speed is set to 15 seconds or more, the function to remove noise for
long exposure shots is activated. Therefore, the time until image recording is complete
is about twice the set shutter speed. This function is activated regardless of the setting
for [Noise Reduction].
• When the shutter speed is set to 1 or more seconds, the camera shake correction
function cannot be used. When the shutter speed is set to 1 or more seconds while
the camera shake correction function is turned on, E changes to F.