Ricoh GX200 - Manual (Page 208)

206
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
n
g
s
5
If you do not operate the camera for a set period of time, it shuts off
automatically to conserve battery power (Auto Power Off).
By default, auto power off is set to one minute, but you can change
this setting.
To change the auto power off setting, follow the steps below.
1
Display the setup menu.
• For the operating procedure, see P.184.
2
Press the " button to select [Auto Power Off] and press
the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
• To continue using the camera after auto power off turned the camera
off, press the POWER button to turn the camera on again. You can
also press and hold the 6 (Playback) button for more than one
second to turn on the camera in playback mode.
• Auto power off does not work when the camera is connected to a
computer or printer.
• When using interval shooting, the [Auto Power Off] setting is not valid
and auto power off does not work.
Changing the Auto Power Off Setting
(Auto Power Off)
Available Settings
Off (Auto Power Off is turned off)
1 Min. *Default setting
5 Min.
30 Min.