Ricoh GX200 - Manual (Page 28)

26
If
yo
u
are u
s
in
g
th
e
ca
mera
fo
r th
e
fi
rst ti
me
, r
e
ad
th
is
secti
o
n
.
You can use the up-down dial
and ADJ. lever to easily
perform various operations
that are usually done using
the !"#$ buttons.
You can rotate the up-down
dial as shown here.
You can press the ADJ. lever
to the left and right and press
the center.
You can use the up-down dial and ADJ. lever to perform the
following operations.
Mode/Display
Description
Refer to
Up-down Dial ADJ. Lever
Select ADJ. Mode - Press the center to select
ADJ. mode. P.72
ADJ. Mode Same as !" buttons. Press to the left and right:
Same as #$ buttons.
Press the center: Same as
MENU/OK button.
P.72
Aperture Priority
Mode (A) Allows you to change the
aperture value. - P.87
Manual Exposure
Mode (M) Allows you to change the
aperture value. Allows you to change the
shutter speed. P.89
Program Shift Mode
(P) Allows you to adjust the
combination of aperture
value and shutter speed. - P.92
Shooting/Playback/
Setup Menu Same as !" buttons. Press to the left and right:
Same as #$ buttons.
Press the center:
Allows you to return to
menu tabs (top of display)
when viewing screen tabs
(left of display) or selecting
setting items.
P.103,
156,
184
How to Use the Up-down Dial and
ADJ. Lever
Up-down dial
ADJ. lever