Ricoh GX200 - Manual (Page 178)

176
O
th
e
r P
lay
b
ack
F
u
n
c
ti
o
n
s
3
6
Press the POWER button or the
6 (Playback) button for more
than one second to turn the
camera on.
Caution------------------------------------------------------------------------------------------
• When the AV cable is connected to the camera, the indicators on picture display or
the LCD viewfinder disappear and the speaker output turns off.
• Do not force the AV cable into the terminal.
• Do not apply excessive force with the AV cable connected.
• When using the AV cable, do not move the camera with the AV cable.
Note ----------------------------------------------------------------------------------------------
• You can connect the AV cable to the Video In terminal on your video recorder and
record what you have shot to a video recorder.
• Your camera is set to NTSC video format (used in North America and other countries/
regions) for use with television equipment and other audiovisual equipment. If the
equipment you want to connect to uses PAL format (used in Europe and elsewhere),
then switch your camera to PAL format before connecting. (GP.217)
The default setting varies depending on where you purchased the camera.