Ricoh GX200 - Manual (Page 191)

189
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
n
g
s
5
When using the optional wide conversion lens (DW-6) or tele
conversion lens (TC-1), it is necessary to set which lens will be
used.
1
Display the setup menu.
• For the operating procedure, see P.184.
2
Press the " button to select [Conversion Lens] and
press the $ button.
3
Press the !" buttons to select
the desired setting.
Setting the Type of Conversion Lens
(Conversion Lens)
Available Settings Description
Off Even when a conversion lens is attached to the camera, the camera
will not be recognize it as an attached conversion lens.
WIDE [DW-6] When a conversion lens is attached to the camera, it will be
recognized as a wide conversion lens (DW-6).
TELE [TC-1] When a conversion lens is attached to the camera, it will be
recognized as a tele conversion lens (TC-1).
Start Sel.
*Default setting
The conversion lens type selection screen always appears at the
following times. This is useful when frequently using both the DW-6
and TC-1 lenses.
• When the camera is turned on with a conversion lens attached
• When the conversion lens is attached to the camera