RCA 31-5030 - Manual (Page 21)

21
SETUP/MENU — (Front Panel) In DVD Play modes (PLAY, RESUME
STOP, etc.), press to display the DVD disc menu.
Additional Disc Playback Options
• To freeze playback, press PAUSE . To advance one frame at a
time (DVD only), press PAUSE again.
• To resume normal playback, press PLAY .
• To skip to the next or previous chapter/track, press F or J.
• To scan forward or backward at variable speeds, press @ or I .
• To play in slow motion, press SLOW/MEM .
• To stop playback, press STOP once. PRESS PLAY TO CONTINUE
appears on the TV screen. To resume playback from the same
place on the disc, press
PLAY . To stop playback completely and
restart the disc, press STOP twice.
BASIC RADIO FUNCTIONS
Presetting Radio Stations
1. Turn on the system and press RADIO on the remote control, or
rotate FUNCTION SELECTOR to select FM or AM .
The last station received is tuned in and its band and frequency
are displayed on the front panel display.
2. Press and hold TUNING +/- until the frequency starts to change.
Then release.
Scanning stops when the system tunes in a station.
To tune in weak stations manually, press TUNING +/- repeatedly.
3. Press SLOW/MEM on the remote control or STORE PRESETS
on the front panel.
P - - appears on the front panel display.
4. Use the 0-9 buttons or press PRESET +/- to enter a preset
number from 01 to 40 .
You must enter the desired preset number within five seconds.
5. Press SLOW/MEM on the remote control or STORE PRESETS
on the front panel again to store the preset number. MEM will
appear to indicate the preset has been memorized.
6. Repeat steps 2-5 to preset up to 40 AM/FM stations.
To change a preset station, simply save over the previously
memorized preset.
Listening to Presets
1. Turn on the system and press RADIO on the remote control, or
rotate FUNCTION SELECTOR to select FM or AM .
2. To select a preset station, use 0-9 , or press PRESET +/- to skip
to the next or previous station.
Adjusting Stereo/Mono
If an FM station is noisy, press ST/MO .
• This turns off stereo sound, but may improve sound quality.
• To switch back to stereo, press ST/MO again. Stereo appears in
the display.
• Not all stations are broadcast in stereo. For those stations
without stereo, pressing the ST/MO button has no effect.