Roland FR-7/FR-5 - Manual (Page 65)

9.7 Bulk Dump ALL, 9.8 Bulk Dump SET
V-Accordion r
65
(2) Press the [DATA÷ENTER] knob to select the “FROM”
parameter, then turn it to select the Set whose set-
tings you wish to copy.
By default, the FR-7/FR-5 selects the number of the
Set you are currently using.
(3) Press the [DATA÷ENTER] knob to select the “TO”
parameter, then turn it to select the Set memory
to which the settings should be copied.
Carefully check whether you have selected the cor-
rect Set memories, then…
(4) Press [MENU÷WRITE] to copy the settings.
The display confirms this operation:
9.7 Bulk Dump ALL, 9.8 Bulk Dump SET
These two functions allows you to transmit all of the
FR-7/FR-5’s settings or just the settings of the currently
selected Set to an external MIDI device (which could be
a second FR-7/FR-5). See page 75 for details.
9.9 Restore SET
This function allows you to load
the settings of one of the pre-
programmed Sets into the cur-
rently selected Set memory.
Warning: This command over-
writes all settings of the current Set, i.e. the parameters
of the following sections: 2. Treble Edit, 3. Bass Edit, 4.
Free Bass Edit, 5. ORC Bass Edit, 6. Orchestra Edit and 7.
Set Common.
It can come in handy, though, if you want to return to
one of the factory Sets and use it as is or as a starting
point for new edits.
(1) On the page shown above, press the [DATA÷ENTER]
button.
The display now changes to:
(2) Rotate the [DATA÷ENTER] knob to select the factory
Set you want to load.
(3) Press [MENU÷WRITE] to load the settings.
The display confirms this operation: