Roland MC-09 - Manual (Page 54)

54
Changing the way in which a loop plays (Loop Control)
Making loop control settings
1
Select the pattern or effect pattern for which you want to store
loop control settings.
If you want to edit an existing loop control setting, select the pattern/effect
pattern that includes it.
2
Press the [LOOP CTRL] button so its indicator lights.
Loop control will be turned on.
3
Press the [DISPLAY] button enough times to get the TONE/
TYPE indicator to light.
4
Use the [INC] and [DEC] buttons to select the loop control
type.
: Pitch
: Trigger
: Divide times 16
5
Press the [SEQ REC] button.
You will enter a mode in which you can make loop control settings (Step
Edit).
6
Press the [SETUP] button.
This lets you make preparatory settings for loop control.
7
Use the [INC] and [DEC] buttons to specify the loop control
length (1 or 2 measures).
The display will show the loop control length.
8
Press the [SCALE] button to select the step unit and number of
steps.
16th notes x 16 steps: indicator dark
8th note triplets x 12 steps: indicator lit
If loop control settings have
already been made, you
can press the [REST] button
in loop control settings to
erase the values of all steps.