Install ceiling mount adapters/projector stands, Pre l iminar y – Runco CINEWIDETM VX-3000D User Manual

Page 47

Text mode
Original mode

VX-3000d Series Installation/Operation Manual

PRE

IMINAR

Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, these
brackets bring the mounting points for the projector mounting plate (included with the
projector ceiling mount kit) from the bottom of the projector up and around the AutoScope
lens motor housing. For floor installations (where the projector is upright), the adapters
allow the projector to lie flat on the mounting surface.

Using the four (4), supplied M6 x 12mm Flat-Head Phillips screws (item #6), attach the
AutoScope Ceiling Mount Adapters/Projector Stands (items #4 and #5) to the projector as
shown in Figure 3-8.

Figure 3-8. VX-3000d with Ceiling Mount Adapters/Projector Stands

DO NOT OVER-TIGHTEN THE SCREWS.

Caution